Muxlab 8 x 8 Cat 5e/6 Line Level Audio Matrix Switch Manuel d'utilisateur télécharger pdf (Page 36)

Page 36

7. Network

network

Description: Get the network address values (IP, mask and gateway)

Arguments: <none>

Example: Get network address values

network

Response: IP: 10.0.1.101

MASK: 255.255.0.0

GATEWAY: 10.0.0.1

DHCP: ON

(or an error message if the command failed)

Network –ip <ip address>

Description: Set a specific IP address (note that DHCP must be disabled to perform this action)

Arguments: <ip address>: #.#.#.#

Example: Set the IP address to 192.25.80.13

Network –ip 192.25.80.13

Response: IP: 192.25.80.13

MASK: 255.255.0.0

GATEWAY: 10.0.0.1

DHCP: OFF

(or an error message if the command failed)

Network –m <mask address>

Description: Set a specific mask address (note that DHCP must be disabled to perform this action)

Arguments: <mask address>: #.#.#.#

Example: Set the mask address to 255.255.255.0

Network –m 255.255.255.0

Response: IP: 192.25.80.13

MASK: 255.255.255.0

GATEWAY: 10.0.0.1

DHCP: OFF

(or an error message if the command failed)

Network –g <gateway address>

Description: Set a specific gateway address (note that DHCP must be disabled to perform this action)

Arguments: <gateway address>: #.#.#.#

Example: Set the gateway address to 10.101.1.5

Network –g 10.101.1.5

Response: IP: 192.25.80.13

MASK: 255.255.255.0

GATEWAY: 10.101.1.5

DHCP: OFF

(or an error message if the command failed)

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 46 47

Pas de commentaire

Muxlab 8 x 8 Cat 5e/6 Line Level Audio Matrix Switch Manuel d'utilisateur Page 36