Muxlab 8 x 8 Cat 5e/6 Line Level Audio Matrix Switch Manuel d'utilisateur télécharger pdf (Page 11)

Page 11

3.5.

Installation Procedure

In order to install the Audio 8x8 Matrix Switch, please follow the steps below:

1. Place the Matrix Switch in its final location (see Section 3.4 Physical Installation).

2. Ensure that power is OFF on all sources and outputs.

3. Connect all sources and outputs to the Matrix Switch.

4. Connect the external 12 VDC power supply to the Matrix Switch and plug the

power supply into an AC power outlet.

5. Power up all equipment.

6. Figures 6 and 7 show some typical configurations.

The Matrix Switch is now ready to use. See Section 3.7 Manual Control for

instructions on usage.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 46 47

Pas de commentaire

Muxlab 8 x 8 Cat 5e/6 Line Level Audio Matrix Switch Manuel d'utilisateur Page 11