Muxlab HDMI 4x4 Matrix Switch Manuel d'utilisateur télécharger pdf (Page 15)

e 15

3.6. Port Control Operation

RS-232/USB Control

The HDMI 4x4 Matrix Switch features built-in firmware

that allows commands from an ASCII terminal to be

sent directly to the device via either a USB or RS-232

connection (not both simultaneously). If connecting with

an RS-232 cable, ensure that the cable has the straight-

through configuration shown in Figure 6.

Figure 6: RS-232 Cable Configuration

Port Control is performed with either the MuxLab

Control Center software, described in Section 3.7, or

with a terminal emulator such as the one available under

Windows with the ASCII Command Set described in

Appendix A. Please note that USB to RS-232 converter

cables could result in problems, depending on the

quality of the product.

DB9

Male

DB9

Female

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 43 44

Pas de commentaire

Muxlab HDMI 4x4 Matrix Switch Manuel d'utilisateur Page 15